Product > Polyglass


High-performance coating systems

The Polyglass range of materials was originally developed to create a spray-applied protective coating which offered all the performance advantages of a flake glass filled system, together with improved ease and speed of application.
Over the years, the Polyglass range has expanded to include different formulations developed to meet specific application requirements.
Today, these products are used throughout the industrial world, to protect components as diverse as offshore process vessels, pipelines, structural steel and even hospital hot water tanks.
Polyglass has proven highly effective in extremely corrosive environments. Specially formulated to give optimum ease of application and short cure cycles, Polyglass offers a remarkably low  permeation rate, combined with excellent resistance to abrasion and cathodic disbondment. The inherent durability and undercutting resistance of this high performance coating enables it to remain intact, even when damaged through to the metal substrate, with negligible under-film creep.

Universal application potential

Polyglass requires no primer although a primer can be provided where logistics demand. It is easy to apply, cures quickly and can be applied in single coat applications.
It provides an extremely tough, long life, highly corrosion and chemical resistant lining with quick cure times.
Polyglass can be used on a wide variety of substrates including steel and concrete, and has been used for protection in the offshore, oil and petrochemical, power generation, marine, water/sewerage and process industries.
Polyglass materials can be used with standard airless spray set-ups, plural component systems and for small areas with conventional gun and pressure pot. Polyglass materials cure at low temperatures and can be used at ambient temperatures as high as 40C. Single coat applications, quick cure times and simple application can reduce down time significantly and total life cycle costs, compared with conventional paint and coating systems, can be reduced by up to 60%.

Polyglass is produced with a specially manufactured micro-flake using ECR (extra corrosion resistant) glass.
ECR glass flake imparts better qualities to Polyglass than standard glass flakes and in conjunction with highly modified resin systems provides a very low permeation, mechanically strong, tough and abrasion resistant coating with outstanding long-term performance.

To view Polyglass product datasheet PDFs, please use the table below:

Product Description Datasheet
Ecoflake A styrene-free bisphenol polyester glass flake. Download datasheet for Ecoflake
Polyglass 100 A two-pack, iso-phthalic polyester acrylic glass flake coating. Download datasheet for Polyglass 100
Polyglass HA/HA VE A thick two-pack, polyester or vinyl ester/acrylic glass flake for hand application. Download datasheet for Polyglass HA/HA VE
Polyglass Pipe Grade A polyester glass flake pipe coating, specifically for application using centrifugal pipe rolling techniques. Download datasheet for Polyglass Pipe Grade
Polyglass PPA A peroxide catalysed, glass flake polyester primer. Download datasheet for Polyglass PPA
Polyglass PPV A two-pack peroxide catalysed vinyl ester glass flake primer. Download datasheet for Polyglass PPV
Polyglass Standard A two pack cold cured polyester/acrylic co-polymer enhanced with flaked glass. Download datasheet for Polyglass Standard
Polyglass VE A cold cured glass flake vinyl ester acrylic co-polymer. Download datasheet for Polyglass VE
Polyglass VE Pipe Grade A two-pack, cold cured glass flake vinyl ester acrylic co-polymer, enhanced with flaked glass, specifically formulated to be applied using a centrifugal pipe rolling rig. Download datasheet for Polyglass VE Pipe Grade
Polyglass VE Veilcoat A resin rich, two-pack, cold cured vinyl ester/acrylic copolymer containing small quantities of wax. Download datasheet for Polyglass VE Veilcoat
Polyglass VEF A glass flake vinyl ester acrylic co-polymer. Download datasheet for Polyglass VEF
Polyglass VEFT A two-pack cold cured vinyl ester/acrylic co-polymer enhanced with flaked glass. Download datasheet for Polyglass VEFT
Zipcoat A rapid curing, two-pack, multi-monomer isophthalic polyester glass flake coating. Download datasheet for Zipcoat